Follow BUSRide on Facebook Follow BUSRide on Twitter Watch BUSRide on YouTube
Follow BUSRide on Facebook Follow BUSRide on Twitter Watch BUSRide on YouTube

Vehicle Assist and Automation: Not your granddaddy’s bus

By Brian Pessaro

Imagine this scenario. It is January and a Metro bus is heading north on I-35West into Minneapolis during morning rush hour. Traffic starts to back up at the Crosstown as it always does, and within only a few minute the bus comes a standstill. Great. Now the driver is going to miss the next time point. If this keeps up the bus may be a full 20 minutes late arriving downtown. Passengers start to grumble and start whispering to one another. “Why doesn’t he just take the shoulder,?” they ask. “After all, Metro buses are allowed to use them during traffic jams.”

But in this case the driver is not willing to take the risk. With all the snow on the ground he has no way to tell where the shoulder ends, so he stays put. The passengers continue their grumbling as the bus indeed arrives downtown 20 minutes late. If only there were a way he could safely use that shoulder during lousy weather.

Now, imagine a different scenario. Heading north on the same corridor again traffic starts to back up. Only in this scenario the driver presses a button that activates the new driver assist system, making the snow no longer a concern as the driver can view the shoulder boundaries digitally projected on a head-up display.

He moves safely onto the shoulder and starts bypassing the congestion — much to the delight of the passengers onboard. Continuing down the road, the bus starts to drift  a little too far left, causing the digital boundary on the head-up display to flash red as a warning. At the same time the left side of the driver’s seat begins to vibrate as if driving over a rumble strip — another warning cue from the driver assist system. The driver makes a steering correction and keeps moving, arriving downtown on time and unstressed with a happy busload of passengers.

Welcome to the world of vehicle assist and automation (VAA), guidance technologies that provide partial or full control of a vehicle’s movements. In the transit industry, VAA can be used for guiding buses in a narrow lane or shoulder, precision docking at stations or collision avoidance.

As yet, VAA is not in widespread use. What little use is predominately by European operators. For example, in Rouen, France bus transit buses use an optical guidance system that relies on cameras that can read the road stripes and make steering corrections. In Eindhoven, Netherlands, a series of magnetic markers embedded in the road precisely guide the bus into the station. Until recently, only two agencies in the U.S. even attempted to use VAA in bus revenue service.

The Las Vegas MAX bus rapid transit was created with an optical guidance system, but it was quickly discontinued after it was discovered the cameras couldn’t read the stripes in the harsh desert environment. The other system, which was much more successful, was the Cleveland HealthLine bus rapid transit. They opted for a low-tech form of VAA. They use mechanical guide wheels mounted on each side of the front axle to guide the buses into the stations.

That being said, several locations in the U.S. are giving VAA another try and are experimenting with a variety of technologies.

MVTA

In Minneapolis, the Minnesota Valley Transit Authority has partnered with the ITS Institute at the University of Minnesota to create a GPS based driver assist system very much like the one described above.

In California and Oregon, Caltrans has partnered with the engineers at PATH at UC Berkeley to develop a magnetic based guidance system. They plan to use it in two places. AC Transit in the San Francisco Bay area will use it to guide a bus on an HOV lane across the San Mateo bridge and through a narrow toll plaza. Lane Transit District in Oregon will use it for precision docking on their EmX bus rapid transit system. Finally, the San Diego Association of Governments plans to start a new bus on shoulder service on I-805 between South Bay and University Towne Centre that will include buses equipped with optical guidance and adaptive cruise control.

We at the National Bus Rapid Transit Institute have been asked by FTA to evaluate what impacts these technologies have on bus revenue service. We’ll be looking at customer and bus operator satisfaction, efficiency and productivity, maintenance, and safety, as well as how the technology performed. Will these new demos of VAA succeed? Will they be worth the investment? Stayed tuned for the results!

Brian Pessaro is a senior research associate for the National Bus Rapid Transit Institute

Share
Posted by on Sep 7 2010. Filed under NBRTI On the Move. You can follow any responses to this entry through the RSS 2.0. You can leave a response or trackback to this entry

1 Comment for “Vehicle Assist and Automation: Not your granddaddy’s bus”

  1. hemant

    what is the scope in national bus rapid transit? Is there good job in this field?

Leave a Reply

©2013 BUSRide Magazine. All Rights Reserved. Content on this website is copyrighted and may not be reproduced in while or in part without the express written consent of the publisher.

© 2010-2014 BUSRide Magazine All Rights Reserved. Content on this web site is copyrighted and may not be reproduced in whole or in part without the express written consent of the publisher.